• When instaling leader pins and brushing into the mold, it is advised that the press fit be lubricated. This will eliminate the potential bonding of the aluminum to the steel when pressure is applied.
• CAD files are availavle from the Almo web site or on CD from DMS.

* QUICKSET mold bases do not offset set a leader pin and bushing assembly. One set of leader pins and bushings provided with this mold kit will be 18 mm diameter or 19 mm diameter. Mating of the diameters should be checked prior to final assembly.

ITEM		CATALOG NO.
	CAPSCREW RETAINER	CR246
	LEADER PIN - 18 MM	LP246-18
	LEADER PIN - 19 MM	LP246-19
	BUSHING - 18 MM	BU246-18
	BUSHING - 19 MM	BU246-19