• The heat transfer characteristics of aluminum promotes faster cycle times.
• Quicksets can be ground, welded and textured.
• When reaming holes, especially small diameters in aluminum, it is advised to be oversize by +.01 mm to +.02 mm.

* QUICKSET mold bases do not offset set a leader pin and bushing assembly. One set of leader pins and bushings provided with this mold kit will be 14 mm diameter or 15 mm diameter. Mating of the diameters should be checked prior to final assembly.

ITEM		CATALOG NO.
	CAPSCREW RETAINER	CR196
	LEADER PIN - 14 MM	LP196-14
	LEADER PIN - 15 MM	LP196-15
	BUSHING - 14 MM	BU196-14
	BUSHING - 15 MM	BU196-15