 Heating and Cooling - E Series Baffles - 
CATALOG
NUMBER |
A |
B
|
PIPE
THREAD |
DRILL
SIZE
|
LENGTH
+- .004 |
EB25-48 |
0.437 |
0.446 |
1/4NPT |
7/16 |
48" |
EB37-48 |
0.562 |
0.576 |
3/8NPT |
9/16 |
48" |
EB50-48 |
0.688 |
0.703 |
1/2NPT |
11/16 |
48" |
EB75-48 |
0.906 |
0.926 |
3/4NPT |
15/16 |
48" |
EB100-48 |
1.125 |
1.150 |
1"NPT |
1-1/8 |
48" |
DMS “E-Series” brass baffles are an economical way to baffle longer water lines.
• Will not twist in hole due to its
configuration.
• Will not rotate out of its located
position.
• Recommended for use in Die Cast
Dies where high temperatures are
used.
Simply cut to the required length and insert slightly short of final depth. These baffles will then be forced home by a pipe plug or block. |
|
