• For gating of small, thin walled parts.
• This insert does not have a raised lip (calotte).
• Suitable for very thin-walled parts.
• Usable for all thermoplastics including fillers up to 50% glass.
• All inserts have the gate diameter ‘d2’ molded into them.

Thin Walled Miniflow
Designed for particularly thin-walled parts (0,5 to 1,2 mm wall thickness). The insert has no raised lip (calotte). Gating will occur flush with the molding.
• the gating point will be flush with, or slightly
  projecting from, the bottom surface depending  
  on the plastic used.

CAD files available at:
www.exaflow.com