| ~40 HRC |
~60 HRC |
| TGC3-U |
TGC3-H |
|
- The maximum contour depth is 5mm.
- Up to 1,5 x 5mm gate point diameter
(film gate).
- Available in two different hardnesses.
- Standard Lip Design
- The maximum contour depth is 5mm.
- Gate area can be up to 1,5 x 5,5mm.
- 3D CAD for lip design can be downloaded from the i-mold website.
- Small Lip Design
- The maximum contour depth is 4,75mm.
- Gate area can be up to 1,0 x 5,0mm.
- 3D CAD for lip design can be downloaded from the i-mold website.
IMPORTANT: Maintain a 0,25mm offset from the CAD reference point!
|
