| ~40 HRC |
~60 HRC |
| TGC2-U |
TGC2-H |
|
- The maximum contour depth is 3mm.
- Up to 1,8mm gate point diameter.
- Available in two different hardnesses.
- Standard Lip Design
- The maximum contour depth is 3mm.
- Gate area can be up to 1,8mm.
- 3D CAD for lip design can be downloaded from the i-mold website.
- Small Lip Design
- The maximum contour depth is 2,75mm.
- Gate area can be up to 1,2mm.
- 3D CAD for lip design can be downloaded from the i-mold website.
IMPORTANT: Maintain a 0,25mm offset from the CAD reference point!
|
